Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Peroxide-Cured Silicone, 1/2"" ID x 3/4"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications. Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -60 to 460¿F (-51 to 238¿C) Sterilize: Autoclave or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Viton FDA Compliant Tubing, 3/8"" (9.5 mm) ID
Applications: FDA compliant food or laboratory applications, acid and solvent transfer, high temperature work. Characteristics: Good chemical resistance, opaque white. Certification: FDA compliant. Temperature range: -25 to 400¿F(-32 to 204¿C) Sterilize: Circulating hot air oven at 480¿F (249¿C)
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGN E-LFL 0.25MMID 100FT
Masterflex Ismatec Pump Tubing, Tygon S3™ E-LFL, 0.25 mm ID; 100 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING TYGN LMT55 6.4 15M 50FT
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 6.4 mm ID x 9.5 mm OD; 50 ft, Avantor
Accuflow Systems Saint-Gobain C-Flex TPE Tubing, 0.125 in ID, 50 ft, Translucent
Translucent thermoplastic elastomer tubing engineered for biopharmaceutical and laboratory fluid transfer. The tubing is flexible, bondable, and suitable for peristaltic pumps, aseptic welding, and single-use assemblies; supplied as a 50 ft coil with a 0.125 in inner diameter and 0.25 in outer diameter.
- Inner diameter 0.125 in (3.2 mm)
- Outer diameter 0.250 in (6.4 mm)
- Wall thickness 0.062 in (1.6 mm)
- Standard length 50 ft (15 m)
- Material thermoplastic elastomer (TPE)
- Appearance translucent for fluid visibility
- Temperature range -67°C to 135°C (-85°F to 275°F)
- Average working pressure 27 psi (1.9 bar)
- Sterilization compatible: gamma irradiation and X-Ray up to 50 kGy; autoclave one time at 121°C for 30 minutes (radiation recommended)
- Applications peristaltic pumping, aseptic sealing and welding, single-use fluid transfer, buffer and media handling
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Kynar Flex™ 2750 PVDF, 3/16"" ID x 1/4"" OD; 50 ft
Applications: High purity and temperature, UV sensitive, or aggressive chemical fluid transfer. Characteristics: Excellent chemical resistance, low TOC, rigid tubing works well with compression and over-molded fittings and adapters. Translucent. Certification: FDA complaint (21 CFR 177.2600), meets USP Class VI requirements, and is made in accordance to cGMP. Temperature range: -40 to 275¿F (-40 to 135¿C) Sterilize: Autoclave, gamma irradiation, or ethylene oxide.
AVANTOR MASTERFLEX (VWR LLC) MFLEX TUBING CHEM BIO 24 50FT
Masterflex L/S High Performance Precision Pump Tubing, Chem-Durance Bio, L/S 24; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) MFLEX TUBING CHEM BIO 36 50FT
Masterflex L/S High Performance Precision Pump Tubing, Chem-Durance Bio, L/S 36; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX C-FLEX NO 16 400F
Masterflex L/S Spooled Precision Pump Tubing, C-Flex, L/S 16; 400 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, FEP, 3/8"" ID x 7/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn¿t deteriorate with age. Tough, but bends even at -454¿F (-270¿C). Translucent. Certifications: Resin is FDA-compliant (21 CFR 177.1550). Tubing is manufactured in ISO 9001-2008 approved facility. Temperature range: -454 to 400¿F (-270 to 205¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
USA Scientific Inc 200 uL TipOne nat, bev tip
TipOne 200 uL natural, beveled pipet tips, 80 racks of 96 tips (7680 tips)
Hach Company Tubing, Tygon, R-3607, 7.9 mm (I.D.)
Chemical-resistant, Formula R-3603 Tygon tubing with flex strength greater than rubber. Unaffected by oxidizing agents and compatible with virtually any laboratory chemical. Bends readily to sharp radius curves and will maintain strong grip on glass or metal. Highly polished bore prevents interior build-up while facilitating cleaning.
Grainger Media Bottle 44.45mm H 69.85 mm Dia PK10
The Grainger 14N159 is a 14 inch diameter, 159 tooth, 10 degree pressure angle, cast iron spur gear made by Martin Sprocket and Gear. It has a pitch diameter of 5.25 inches, a 0.4375 inch face width, an approximate weight of 5 lbs, and a bore size of 1 inch. The gear is designed for industrial power transmission applications and features a rough finish and no further machining needed. It is manufactured in the USA to AGMA quality standards. The cast iron material offers good wear resistance and strength. Overall, this is a sturdy, heavy-duty spur gear well-suited for industrial drivetrain systems.
Thomas Scientific TUBING 5/16 x 11/16 x 3/16 ft (10 ft per pack and 50 ft pe
TUBING 5/16 x 11/16 x 3/16 ft (10 ft per pack and 50 ft pe